Defender PHOENIX1 Manuál s instrukcemi stáhnout pdf (Strana 18)

PHOENIX1

14PHOENIX1

CHANGING THE CYCLE/DWELL TIME IN AUTO MODE

You can change the dwell/cycle time (time interval to switch between cameras) so that the video switches more or less

frequently:

a) Press and hold down the M and A buttons simultaneously. You will hear the monitor begin to beep.

b) The rst beep will signify one second and every beep afterwards increases the dwell time by one second. For

example, if you would like the dwell/cycle time to be 12 seconds you will have to hold down the M and A buttons

until you hear the monitor beep 12 times.

c) When you reach the desired number of seconds, release the

M and A buttons.

d) You will hear the monitor beep again at a quicker rate. This

will conrm the new duration of the dwell/cycle time (12

beeps equal a 12 second cycle dwell time).

e) To change the duration time again, press and hold down the

M and A buttons until you reach a desired interval time.

f) When you are nished setting a new duration press the A

button again to view video with your new dwell cycle time.

Note: Every time you power o the PHOENIX1, the dwell/cycle defaults back

to four seconds.

CONNECTING TO A TV/VCR/DVR

You can connect to a TV for viewing or to a VCR/

DVR for recording.

In order to view and record video from your

PHOENIX1 system, your TV/VCR/DVR must have

videoinputjacks.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Žádné komentáře

Defender PHOENIX1 Manuál s instrukcemi Strana 18